|
Specifications:
|
||
| ADM1 | : Analogue Dimming Module | |
| Occupancy Sensor | : Passive Infra-Red Detector | |
| field of view | : : 360 degrees | |
| coverage | : diameter = 2.5 x height | |
| Light Sensor | : Photo-Darlington | |
| light range | : 25 - 2,000 Lux, preset by remote control | |
| Remote Control Sensor | : Active Infra-Red @ 33KHz, encoded | |
| range | : 2 - 3 metres, 60 degree angle | |
| Timer | : 4,8 or 16 minutes, preset by remote control | |
| Supply Voltage | : 230V A.C. @ 50Hz | |
| Output DimmingCommunications | : Isolated 1-10V DC Analogue compatible | |
| Loading | : Up to 8 ballasts. (Normally 4 Luminaires) | |
| Electrical Connections | : Live, Neutral, Switched Live @ 3 Amp. | |
| : 1-10V SIG and GND | ||
| EAD1 | : Economy Analogue Dimmer | |
| as ADM1 except | ||
| Output Dimming Communications | : Non-Isolated 1-10V DC Analogue | |
| compatible | ||
| Loading | : Up to 2 ballasts. (built into 1 Luminaire) | |
| Products and Codes | ||
| ADM1F | : ADM1, Flush fitting for ceiling tiles | |
| size | : 58mm deep x 54mm dia., face 75mm dia. | |
| weight | : 100g | |
| ADM1S | : ADM1, Surface fitting for hard surfaces | |
| size | : with DMR1, 78mm deep x 61mm dia. | |
| weight | : with DMR1, 170g | |
| EAD1H | : EAD1, in Housing fitting | |
| ITX3, supplied with above units | : ITX3, supplied with above units | |
| DMR1, supplied with ADM1S | : Surface mounting receptacle. | |
| ITX4 | : Hand-Held I.R. remote control | |
|
Specifications:
|
||
| DDM1 | : Digital Dimming Module | |
| Occupancy Sensor | : Passive Infra-Red Detector | |
| field of view | : 360 degrees | |
| coverage | : diameter = 2.5 x height | |
| Light Sensor | : Photo-Darlington | |
| light range | : 25 - 2,000 Lux, preset by remote control | |
| Remote Control Sensor | : Active Infra-Red @ 33KHz, encoded | |
| range | : 3 - 4 metres, 60 degree angle | |
| Timer | : 4,8 or 16 minutes, preset by remote control | |
| Supply Voltage | : 230V A.C. @ 50Hz | |
| Output Dimming Communications | : Isolated 12V Tridonic compatible | |
| : Standard 1%, Eco 10% mininmum dim. | ||
| Loading | : Up to 8 ballasts. (Normally 4 Luminaires) | |
| Electrical Connections | : Live, Neutral and 12V SIG and GND | |
| EDM1 | : Economy Digital dimming Module | |
| as DDM1 except | : Non-Isolated 12V Tridonic compatible : | |
| Output Dimming Communications | Standard 1%, Eco 10% mininmum dim. | |
| Loading | : Up to 2 ballasts. (built into 1 Luminaire) | |
| Products and Codes: | ||
| DDM1/1F | : DDM1, Flush fitting for ceiling tiles, 1% | |
| DDM1/10F | : DDM1, Flush fitting for ceiling tiles, 10% | |
| size | : 58mm deep x 54mm dia., face 75mm dia. | |
| weight | : 100g | |
| DDM1/1S | : DDM1, hard Surface fitting, 1% | |
| DDM1/10S | : DDM1, hard Surface fitting, 10% | |
| size | : with DMR1, 78mm deep x 61mm dia. | |
| weight | : with DMR1, 170g | |
| EDM1/1H | : EDM1, in Housing fitting, 1% | |
| EDM1/10H | : EDM1, in Housing fitting, 10% | |
| ITX3, supplied with above units | : Miniature I.R. remote control | |
| DMR1, supplied with DDM1S | : Surface mounting receptacle. | |
| ITX4 | : Hand-Held I.R. remote control | |
|
Specifications:
|
||
| RDA1 | : Remote Dimmer Analogue | |
| Remote Control Sensor | : Active Infra-Red @ 33KHz, encoded | |
| range | : 2 - 3 metres, 60 degree angle | |
| Supply Voltage | : 230V A.C. @ 50Hz | |
| Output Dimming Communications | : Isolated 1-10V DC Analogue compatible | |
| Loading | : Up to 8 ballasts. (Normally 4 Luminaires) | |
| Electrical Connections | : Live, Neutral and 1-10V SIG and GND | |
| RDA2 | : Remote Dimmer Analogue | |
| as RDA1 except | ||
| Loading | : Up to 12 ballasts. (Normally 6 Luminaires) | |
| Products and Codes: | ||
| RDAxF | : RDA, Flush fitting for ceiling tiles | |
| size | : 58mm deep x 54mm dia., face 75mm dia. | |
| weight | : 100g | |
| RDAxS | : RDA, Surface fitting for hard surfaces | |
| size | : with DMR1, 78mm deep x 61mm dia. | |
| weight | : with DMR1, 170g | |
| : x represents either RDA1 or RDA2 | ||
| ITX3, supplied with above units | : Miniature I.R. remote control | |
| DMR1, supplied with RDAxS | : Surface mounting receptacle. | |
| ITX4 | : Hand-Held I.R. remote control | |
