Specifications:
CCU1 : Combined Ceiling Unit
OccupancySensor : Passive Infra-Red Detector
field of view : 360 degrees
coverage : diameter = 2.5 x height
Light Sensor : Photo-Darlington
light range : 25 - 2,000 Lux, preset by remote control
Remote Control Sensor : Active Infra-Red @ 33KHz, encoded
range : 2 - 3 metres, 60 degree angle
Timer : 4,8 or16 minutes, preset by remote control
Supply Voltage : 230V A.C. @ 50Hz
Relay Switching Capacity : 8 Amps Inductive
Electrical Connections : Live, Neutral and Switched Live
CCU1F/VF : Combined Ceiling Unit / Volt-Free
as CCU1 except Electrical Connections

: Live, Neutral, Common and N/O
CLC1F as CCU1 except : Ceiling Low Current
Relay Switching Capacity : 2 Amps @ 30V, 100mA @ 230V AC
Electrical Connections : : Live, Neutral, Common and N/O
   
Products and Codes:  
CCU1F : CCU1, Flush fitting for ceiling tiles
size : 58mm deep x 54mm dia., face 75mm dia.
weight : 250g
CCU1S : CCU1, Surface fitting for hard surfaces
size : with CUR1, 78mm deep x 61mm dia.
weight : with CUR1, 170g
   
Also Available:  
Kit ‘K’ : Converts Flush to Klip fitting
ITX1, supplied with above units : Miniature I.R. remote control
CUR1, supplied with CCU1S : Surface mounting receptacle.
ITX2 : Hand-Held I.R. remote control
THC : 54mm Tile Hole Cutter
   
Specifications:  
CWU1/1 : Combined Wall Unit
Occupancy Sensor : Passive Infra-Red Detector
field of view : 120 degrees maximum
coverage : 12 metres maximum
Light Sensor : Photo-Darlington
light range : 25 - 2,000 Lux, preset by remote control
Remote Control Sensor : Active Infra-Red @ 33KHz, encoded
range : 2 - 3 metres, 60 degree angle
Timer : 4,8 or 16 minutes, preset by remote control
Supply Voltage : 230V A.C. @ 50Hz
Relay Switching Capacity : 8 Amps Inductive
Electrical Connections : Live, Neutral, Com1 and N/O1
   
CWU1/2 : Combined Wall Unit, Dual Light Zones
as CWU1/1except
Relay Switching Capacity : 2 x 8 Amps Inductive
Electrical Connections : Live, Neutral, Com1, N/O1, Com2 and N/O2
N.B. N/O1 is connected to Live as supplied,
 
this can be removed to give volt free contacts.
  
   
Products and Codes :
CWU1/1 : CWU1/1 Single relay version.
size : 128mm x 77mm x 49mm
weight : 130g
CWU1/2 : CWU1/2, Dual light zones, two relays
size : 128mm x 77mm x 49mm
weight : 200g
   
Also Available:  
ITX1, supplied with above units : Miniature I.R. remote control
ITX2 : Hand-Held I.R. remote control
   
Specifications:  
ELC1 : External Light Controller
Light Sensor : Photo-Darlington
light range : 10 - 2,000 Lux, preset by remote control
Remote Control Sensor : Active Infra-Red @ 33KHz, encoded
range : up to 10 metres, 60 degree angle
Light control delay : 30 seconds of continuous change
Supply Voltage : 230V A.C. @ 50Hz
Output : Volt-Free Normally Open Contacts
Electrical Connections

: Input Live & Neutral (DC= + & - , AC= ~ & ~)
: Output N/O & COM
Case : ABS, IP65 rated
Size & Weight : 90mm dia. x 55mm deep, max 170 gm
   
Products and Codes:  
ELC1 : ELC1 with 230V A.C. @ 50 Hz input
Output contact rating : 10mA to 8 Amp. Inductive @ max 440V A.C..
ELC1/1D or ELC1/1A : ELC1 with 12V D.C. or 12V A.C. input
ELC1/2D or ELC1/2A : ELC1 with 24V D.C. or 24V A.C. input
12V and 24V output contact rating : 10uA to 2 Amp.Resistive @ max 30V D.or A.C.
ITX1P, supplied with above units : Miniature I.R. remote control
ITX2P : Hand-Held I.R. remote control
   
Also Available  
to Special Order:  
ELC1/277 : ELC1 277V A.C. @ 60 Hz input, 8 Amp output
ELC1/110 : ELC1 110V A.C. @ 60 Hz input, 8 Amp output
ELC1/xx/HD1 : ELC1 with 8 Amp. relay output, xx = see below
ELC1/xx/OC1 : ELC1 Open Collector output, xx = see below
  : 1xx = low voltage input code e.g. 1D